Debian Based LAN Router

In the following paragraphs become familiar with to create your own ubuntu router web gateway. The ubuntu router / router will act precisely like another router that you’d have the ability to buy at the shop, except your linux box might have extra performance and additional security. What you will have to make your Ubuntu Router Internet Gateway:

* Extra laptop * (2) Ethernet cards * Switch * Ubuntu 8.04 LTS Server Edition * Putty

This text will clarify the best way to setup a current install of Ubuntu 10.04 server edition, setting up a dhcp server for any neighborhood community,while a plus a firewall in the nasty internet. The very first factor that you simply is going to do is really a recent setup from the Ubuntu server version, but determining on only Open SSH server through the computer software installation portion of the Ubuntu install. Following the setup completes as well as your laptop reboots, you’re then likely to wish to set a root password (su).

sudo passwd root

After you’ll have a set a root password, login into root by typing the next command:


After you may be in super user mode (root) we’re then gonna need to update our Ubuntu Bistro. Kind the following instructions to update the os and various programs.

apt-get replace

apt-get improve

After your laptop updates, restart it.


Setup Network Cards

mire /etc/network/connects

Inside the example below my eth0 signifies the network interface that connects to the net and also the eth1 interface hooksto the switch. The swap then connects to any or all other networked devices, as if your gaming console along with other networked products. I added the following code in to the /etc/network/connects file:

Mire /etc/network/connects

auto eth1

iface eth1 inet static


netmask 255.255.255.

network 192.168.10.


/etc/init.d/networking restart

The next following step is simply not needed, however I love to set a hostname in my gateway, all you need to do is install apache and you’ll have your own private intranet or internet server.

mire /etc/hosts

echo homeserver.gateway.2wire.internet > /etc/hostname

/etc/init.d/ start


hostname -f

Ubuntu Hostname

After you have completed the next above, you should employ putty to entry your linux machine out of your home home windows primarily based pc. This can let you copy the following code, to be quick the technique of making your linux gateway. The very first factor you could do in order to take advantage of putty to configure your Ubuntu gateway, is placed a static ip in your home windows machine, since we don’t possess a dhcp server place in yet. Set a static ip tackle for Microsoft Vista.For individuals who wouldn’t like to use putty you’ll have the ability to just type out the rest of the code, putty simply causes it to be simpler. Upon getting selected your terminal program that the are likely to use, once again login below root. The time has come to set up some software, that we’ll have to setup the gateway.

apt-get setup dhcp3-server bind9 vim perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl libmd5-perl Enable packet sending

mire /etc/sysctl.conf

Uncomment the next line to permit packet sending for IPv4


echo 1 > /proc/sys/internet/ipv4/ip_forward Install Webmin

Webmin is anther good program to make use of to configure you ubuntu router along with other server programs that you just could use. In case you use webmin, it’s possible that you should to merely , utilizing any internet browser you select.

compact disc /opt

mkdir webmin

compact disc /opt/webmin


tar xzvf webmin-1.430.tar.gz

compact disc webmin-1.430/


Throughout installation you’ll be requested a couple of questions, simply press enter a couple of occasions. The main one factor that you would like to alter may be the port quantity, consumer title and password and additionally agree SSL.

Ubuntu Webmin Configure dhcp

Network address – 192.168.10.

Netmask – 255.255.255.

Address ranges - –

After you might have joined the the above mentioned click the create button. It is advisable to now visit a icon that reads 192.168.10., click about this new icon then click the Edit Shopper Options button.

Subnet mask – 255.255.255.

Default hubs –

Broadcast address –

DNS servers –

After you’ve got the above in to the shopper options home home windows click on the save button two times, that ought to return you to definitely the key Dhcp server window. Within the dhcp server display, the thing is a control button known to as Edit Community Interface, click this button and choose eth1 then click save. Now click the Start Sever button, if you notice no errors, you’re good. Configure firewall


Accept if input interface is lo

Accept if input interface is eth0 and condition of connection is made,Associated

Accept if input interface is eth1


Accept if input interface is eth0 and output interface is eth1 and condition of connection is made,Associated

Accept if input interface is eth1 and output interface is eth0

Since concludes building your personal Ubuntu Router Internet Gateway.

Leave a comment

Your email address will not be published. Required fields are marked *